Designers and builders of Loudspeakers in the BBC tradition

Home Products Sales Reviews Gallery About Us Contact Links

To ensure greater production consistency Stirling Broadcast is switching to glued on rear panels across the range. Extensive testing has revealed no performance changes.





Power handling:

60w continuous, 110w short term, IEC268

Max sound level:

100dB, pair @2m

Input impedance:

11ohm nominal

Input connections:

Bi-wire, 4mm terminals (plugs/wires to 4mm cross sectional area)

Frequency response:

75Hz to 18kHz +/-3dB (on HF axis @1m)

Crossover frequency:

3 kHz

Sensitivity:

83dB/1watt/1m

Cabinet details:

Two-way infinite baffle (sealed box). 188mm(w) x 168mm (d) x 302mm (h)

Weight:

4.4 kg each (shipping weight 11.8kg - pair)

Veneers available:

Cherry, Walnut, English Oak, Black Ash, Wild Oak, Zebrano, Ebony, Rosewood

Building upon the strengths of the well-received Stirling Broadcast LS3/5a V2, the Stirling Broadcast LS3/5a V3 “Ultra Low Distortion Monitor” retains the same drive units and thin-walled cabinet but adds a new, higher-specified crossover to attain much lower levels of distortion and higher levels of transparency.

The new crossover, designed by Derek Hughes, is considerably larger, being just 16mm smaller all-round than the front baffle, and incorporates much larger components including closely matched air-cored inductors to remove the saturation experienced with ferrite or iron cores. The crossover is mounted on the rear panel, as for the Kingswood Warren prototype versions, to further decrease distortion.

Due to the higher cost of the new crossover, the Stirling Broadcast LS3/5a V2 will remain available for those situations were ultimate transparency is not required.

The LS3/5a V3 comes with a 5 year warranty and the assurance of the future availability of spare parts.

The Product Brochure for the V3 can be found here and the Installation and Care Instructions can be found here. All brochures and instructions can be found here.